Return to Overview

Reserved printing can be specified in the following cases:

• While the Machine Is Waiting

You can specify copy settings or scan originals while the machine is in the waiting state, such as when the power is just turned ON, or after a paper jam is cleared. Copying automatically begins when the machine is ready. The message <Ready to make reservation copies.> appears on the machine when it is able to process reserved copying.

• You can specify reserved copying while the machine is in the waiting state in the following cases:

• Between the time that the machine is turned ON and when it is ready to copy

• After a paper jam is cleared

• After a cover on the main unit or an optional unit, such as a finisher, is opened and closed

• While the Machine Is Printing

You can specify copy settings for a new job while the machine is printing. Copying of the new job automatically begins when the current job is complete.

1. Press [Close] on the pop-up screen that appears while the machine is printing.

If the job displayed on the touch panel display is from a function other than the Copy function, press [Close] → (Main Menu) → [Copy] to display the Regular Copy Basic Features screen.

2. Place your originals → set the desired copy modes and paper source.

3. Press (Start).

If you specify a reserved copy job while the machine is printing, copying of the new job automatically begins when the current job is complete. If the following screen is displayed, press [OK] → try reserving the job again after the current job is complete.

• Back To Top