Return to Overview

When you want to adjust the image placement, you can output a test page to check whether the image is printed on a correct location on the paper.

1. Press (Settings/Registration) → [Preferences] → [Paper Settings] → [Paper Type Management Settings].

2. Select the paper type that you want to edit from the list → press [Details/Edit].

3. Press [Change] next to [Adjust Image Position].

4. Press [Output Test Page].

5. Select a paper source that contains a custom paper size → press [Start Printing].

The test page is printed.

• 139.7 mm × 182.0 mm to 330.2 mm × 487.7 mm paper can be used for the test pages. Make sure that a sufficient supply of paper is loaded into the machine before starting this procedure.

• If you perform test page using paper smaller than 11" × 17" or A3, the entire image cannot be printed on the paper. Nevertheless, you can read the register mark, because the tail edge you do not have to check is lacking.

• Back To Top