e-ManualTopSite mapHelpGlossary
Top » Basic Operations » Available Paper Stock
Available Paper Stock
07SE-01K
The paper types that can be used with this machine are shown in the following table. Icons indicating the type of paper loaded in each paper drawer can be displayed on the paper selection screen if you store that information in the machine beforehand. (See "Registering the Paper Size and Type for a Paper Source.")
: Available -: Unavailable
Paper Type
Paper Source
Paper Drawer 1
(17 lb bond to 32 lb bond (64 to 120 g/m2))
Paper Drawer 2, 3, 4
(17 lb bond to 60 lb cover(64 to 163 g/m2))
Multi-Purpose Tray
(17 lb bond to 80 lb cover (64 to 220 g/m2))
Thin
(17 lb bond (64 g/m2))*1
Plain 1
(18 lb bond to 21 lb bond (65 to 82 g/m2))
Plain 2
(22 lb bond to 26 lb bond (83 to 99 g/m2))
Plain 3
(27 lb bond to
28 lb bond (100 to 105 g/m2))
Recycled
(17 lb bond to 22 lb bond (64 to 82 g/m2))
Color
(17 lb bond to 22 lb bond (64 to 82 g/m2))
Heavy 1
(29 lb bond to 32 lb bond (106 to 120 g/m2))
Heavy 2
(33 lb bond to 60 lb cover (121 to 163 g/m2))
-
Heavy 3
(61 lb cover to 80 lb cover (164 to 220 g/m2))
-
-
1-Sided Coated 1
(27 lb bond to 60 lb cover (100 to 163 g/m2))
-
-
1-Sided Coated 2
(61 lb cover to 80 lb cover (164 to 220 g/m2))
-
-
2-Sided Coated 1
(27 lb bond to 60 lb cover (100 to 163 g/m2))
-
-
2-Sided Coated 2
(61 lb cover to 80 lb cover (164 to 220 g/m2))
-
-
Tracing Paper
(17 lb bond to 26 lb bond (64 to 99 g/m2))*2
-
-
Transparency
(33 lb bond to 80 lb cover (121 to 220 g/m2))*3
-
*4
Pre-punched
(18 lb bond to 21 lb bond (65 to 82 g/m2))
Bond
(22 lb bond to 26 lb bond (83 to 99 g/m2))
Labels
(33 lb bond to 80 lb cover (121 to 220 g/m2))
-
-
Envelope
-
*5
*1 Thin paper less than 17 lb bond (64 g/m2)cannot be used.
*2 Some types of tracing paper cannot be used.
*3 Use only A4 transparencies made especially for this machine.
*4 Transparencies up to a thickness of 60 lb cover (163 g/m2)can be used.
*5 If the Envelope Feeder Attachment-D1 is attached to Paper Drawer 2, envelopes can be loaded.
: Available -: Unavailable
: Available -: Unavailable
Paper Size
Width x Length
Paper Source
Paper Drawer 1
Paper Drawer 2, 3, 4
Multi-Purpose Tray
12" x 18"
12" x 18"
-
12 5/8" x 17 11/16"
12 5/8" x 17 11/16"
-
-
11" x 17"
11" x 17"
LGL
8 1/2" x 14"
-
LTR
11" x 8 1/2"
LTRR
8 1/2" x 11"
-
STMT
8 1/2" x 5 1/2"
-
-
STMTR
5 1/2" x 8 1/2"
-
EXEC
7 1/4" x 10 1/2"
Envelope
ISO-C5
6 3/8" x 9" (162 mm x 229 mm)
-
*1
COM10 No.10
4 1/8" x 9 1/2" (104.7 mm x 241.3 mm)
-
*1
Monarch
3 7/8" x 7 1/2" (98.4 mm x 190.5 mm)
-
*1
DL
4 3/8" x 8 5/8" (110 mm x 220 mm)
-
*1
Nagagata 3
4 3/4" x 9 1/4" (120 mm x 235 mm)
-
-
Yougatanaga 3
4 3/4" x 9 1/4" (120 mm x 235 mm)
-
-
Kakugata 2
9 1/2" x 13 1/2"(240 mm x 332 mm)
-
-
Custom Size
(5 7/8" x 7 1/8" to 11 3/4" x 16 1/2" (148 mm x 182 mm to 297 mm x 420 mm)
-
*2
(5 1/2" x 7 1/8" to 12" x 18" (139.7 mm x 182 mm to 304.8 mm x 457.2 mm))
-
*2
3 7/8" x 5 9/16" to 12 5/8" x 18" (99 mm x 139.7 mm to 320 mm x 457.2 mm)
-
-
*1 If the Envelope Feeder Attachment-D1 is attached to Paper Drawer 2, envelopes can be loaded.
*2 You can use only Custom Size paper registered in [Paper Type Management Settings] under [Preferences].
NOTE
For instructions on loading paper, see the following sections:
Loading Paper into a Paper Drawer for paper drawers
Loading Paper into the Multi-Purpose Tray for multi-purpose tray
Paper Drawers 3 and 4 are optional products.
Chlorine-free paper can be used with this machine.
Storing Printouts
When handling or storing paper printed by this machine, be careful of the following points.
How to store printouts
Store paper on a flat surface.
Avoid storing printouts in folders made of PVC material, as this may cause the toner to melt and stick to the PVC material. Toner may peel when printouts are folded or creased.
Store printouts in the condition where they are not folded or creased as toner may peel.
Put printouts in a binder when storing for a long period of time (two years or longer).
Printouts may discolor when stored for a long period of time.
Avoid storing printouts in a location subject to high temperatures.
Precautions when sticking printouts with adhesive
Be sure to use insoluble adhesive.
Test the adhesive on an unneeded printout before using.
Before stacking printouts that stuck with adhesive, check that the adhesive completely dried.
Back to Top