Optional Products Required for Each Function
This table describes the optional products that is needed to use each function, the available combination of options that can be installed simultaneously, and the limitations when installing optional products.
Hardware Option
Function
Optional Product Required
Notes
Feeding Tab Paper from Paper Source
Tab Feeding Attachment Kit-B1
-
Printer Cover-B1 and Duplex Color Image Reader Unit-G1 cannot be attached at the same time.
Change Control Panel Type
Upright Control Panel-B1
-
Upright Control Panel-B1 and Control Panel (Flat) (standard-equipped for imageRUNNER ADVANCE 8285) cannot be attached at the same time.
Upright Control Panel-B1 is standard-equipped for imageRUNNER ADVANCE 8205/8295.
Scanning Originals/Auto Document Feed/Job Build
Duplex Color Image Reader Unit-G1
-
-
Adding High Capacity Feeding Area
Paper Deck Unit-C1 or POD Deck Lite-A1
-
Paper Deck Unit-C1 and POD Deck Lite-A1 cannot be attached at the same time.
Collate/Group/Offset
Staple Finisher-Q1 PRO, Booklet Finisher-Q1 PRO, Staple Finisher-N1, or Booklet Finisher-N1
-
Staple Finisher-Q1 PRO, Booklet Finisher-Q1 PRO, Staple Finisher-N1, and Booklet Finisher-N1 cannot be attached at the same time.
Saddle Fold
Booklet Finisher-Q1 PRO or Booklet Finisher-N1
-
Corner Staple/Double Staple
Staple-N1
Staple Finisher-Q1 PRO, Booklet Finisher-Q1 PRO, Staple Finisher-N1, or Booklet Finisher-N1
Saddle Stitch Booklet
Staple-P1
Booklet Finisher-Q1 PRO or Booklet Finisher-N1
Hole Punch
Puncher Unit-BS1
Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO
Puncher Unit-BF1
Staple Finisher-N1 or Booklet Finisher-N1
Professional Puncher-C1
 Professional Puncher Integration Unit-B1 and Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO/Staple Finisher-N1/Booklet Finisher-N1
Trim
Booklet Trimmer-D1
Booklet Finisher-Q1 PRO
Inner Booklet Trimmer-A1
Booklet Finisher-N1
Additional Paper Type for Covers/Paper Insertion
Document Insertion Unit-K1
Staple Finisher-Q1 PRO, Booklet Finisher-Q1 PRO, Staple Finisher-N1, or Booklet Finisher-N1
Z-Fold/Half Fold/C-Fold/Accordion Z-Fold/Double Parallel Fold
Paper Folding Unit-H1
Space for Placing Originals
Utility Tray-A2
-
-
Closing the Feeder
ADF Access Handle
Duplex Color Image Reader Unit-G1
Printer Cover-B1 and Duplex Color Image Reader Unit-G1 cannot be attached at the same time.
Department ID Management Using Card
Copy Card Reader-F1
-
-
Additional USB Port
USB Device Port-A2
-
-
Multimedia Reader/Writer
Multimedia Reader/Writer-A2
USB Device Port-A2
-
System Options
Machine Function
Required
Limitations
PCL Print
PCL Printer Kit
-
-
PS Print
PS Printer Kit
-
-
imagePASS
-
The imagePASS cannot be used with the print function of the machine or the PS Printer Kit.
Direct Print (PDF)/Printing PDF files stored in memory media, the Advanced Box, or the Advanced Box of another imageRUNNER ADVANCE machine on the network.
PS Printer Kit or Direct Print Kit (for PDF/XPS)
-
If the PS Printer Kit is used, the Direct Print Kit (for PDF/XPS) is not required.
Direct Print (XPS)
Direct Print Kit (for PDF/XPS)
-
-
Barcode Print
Barcode Printing Kit
PCL Printer Kit
-
Fax Function
Memory Sending/Register Sender Name/Use Authentication User Name as Sender Name/Confirm Entered Fax Numbers/Subaddress Sending/Fax TX Report/Fax Activity Report/Fax User Data List/Set Line/Tone/Pause/PIN Code Access
Super G3 FAX Board or Remote Fax Kit
-
To use these functions on the Remote Fax Kit, the imageRUNNER ADVANCE series (Remote Fax server machine) with Super G3 FAX Board must correctly be connected with this machine.
To use [Select Line] , you must have more than one telephone line.
Fax Function
Direct Sending/Register Unit Telephone Number/Register Unit Name/Volume Settings/Allow Fax Driver TX/ECM TX/Auto Redial/Send Start Speed/Memory Receiving*1/ECM RX/Subaddress Receiving/Receive Start Speed/Receive Password/Forwarding Settings/Fax RX Report/Confidential Fax Inbox RX Report/Select Line Type/Onhook/Manual Sending/Check Dial Tone Before Sending/Pause Time
Super G3 FAX Board
-
-
Functions Related to Remote Fax
(Settings as a server machine)
Remote Fax Settings
Super G3 FAX Board
-
-
Remote Fax Function
(Settings as a client machine)
Send Remote Fax/Send Remote Fax Settings
Remote Fax Kit
-
To use these functions, the machine with Super G3 FAX Board must correctly be connected with this machine.
Fax Function with 2 Lines
Super G3 2nd Line Fax Board
Super G3 FAX Board
The following functions are only available with Line 1 (the standard line):
Fax/Tel Auto Switch
Remote RX
Audible Tones
On-Hook
Fax Function with 3 to 4 Lines
Super G3 3rd/4th Line Fax Board
Super G3 FAX Board and Super G3 2nd Line Fax Board
If the Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO is attached to the machine with the fax board, you cannot add lines.
Trace & Smooth PDF
Universal Send Advanced Feature Set
-
-
Reader Extensions PDF
-
-
Encrypted PDF
Universal Send Security Feature Set
-
-
Device Signature PDF/XPS
-
-
User Signature PDF/XPS
Universal Send Digital User Signature Kit
-
-
Secure Watermark
Secure Watermark
-
-
HDD Data Mirroring
HDD Mirroring Kit
2.5inch/160GB HDD or 2.5inch/1TB HDD
The HDD Mirroring Kit cannot be used with the HDD Data Encryption & Mirroring Kit.
HDD Data Encryption & Mirroring
HDD Data Encryption & Mirroring Kit
2.5inch/160GB HDD or 2.5inch/1TB HDD
The HDD Data Encryption & Mirroring Kit cannot be used with the HDD Mirroring Kit.
Removable HDD Management
Removable HDD Kit
-
-
Restricting Document Duplication/Track Users
Document Scan Lock Kit
-
-
Viewing Web Pages
Web Access Software
-
-
Printing Web Pages (PDF)/Storing files in Mail Box (PDF)
PS Printer Kit or Direct Print Kit (for PDF/XPS)
If the PS Printer Kit is used, the Direct Print Kit (for PDF/XPS) is not required.
Encrypted Secure Printing
Encrypted Secure Print Software
-
The Encrypted Secure Print Software cannot be used with the imagePASS.
Registering Combinations of Functions
Workflow Composer
-
-
Voice Guidance
Voice Guidance Kit/Voice Operation Kit
-
-
Voice Operation
Voice Operation Kit
-
The Voice Operation Kit cannot be used with the SSO-H user authentication function.
Operation of the Machine from Computer
Remote Operator's Software Kit
-
-
*1 To receive Faxes in Memory, the Additional Memory Type D (512MB) is necessary.

NOTE
The Super G3 FAX Board and Remote Fax Kit cannot be used at the same time.
To scan originals using the feeder or platen glass, the Duplex Color Image Reader Unit-G1 is necessary.
» Optional Products/Software » System Configuration » Optional Products Required for Each Function
08KE-039