e-Manual TopContentsHelpGlossary
Category
Top » Maintenance » Routine Cleaning » Manual Feeder Cleaning

Category Top

Loading Paper

Loading Paper into a Paper Drawer

Adjusting a Paper Drawer to Hold a Different Paper Size

Loading Transparencies

Loading Paper into the Paper Deck Unit-B2 (Optional)

Loading Envelopes Using the Envelope Feeder Attachment-D1 (Optional)

Replacing the Stamp Cartridge (Feeder)

Replacing the Staple Cartridge (For Optional Products)

Replacing the Staple Cartridge in the Stapler Unit (Staple Finisher-G1/Booklet Finisher-G1)

Replacing the Staple Case in the Saddle Stitcher Unit (Booklet Finisher-G1)

Replacing the Staple Cartridge (Inner Finisher-D1)

Removing Punch Waste (For Optional Products)

External 2/3 Hole Puncher-B2

Inner 2/3 Hole Puncher-A1

Replacing the Toner Cartridge

Replacing the Waste Toner Container

Routine Cleaning

Platen Glass and Underside of the Feeder/Platen Cover

Manual Feeder Cleaning

Automatic Feeder Cleaning

Consumables

Collapse all|Expand all
Manual Feeder Cleaning
If originals that have been fed through the feeder have streaks or appear dirty, clean the feeder's rollers.
Clean the rollers of the feeder with a cloth dampened with water, and wipe them with a soft, dry cloth.
IMPORTANT
Spin the rollers while cleaning them.
1.
Clean the rollers of the feeder.
1. Pull the lever, and open the feeder cover.
2. Clean the rollers (a total of three places) inside the feeder cover.
2.
Clean the rollers inside the inner cover.
1. Open the inner cover, holding it by its tab.
2. Clean the rollers (a total of three places) inside the inner cover.
3.
Clean the transparent plastic area on top of the inner cover.
1. Clean the plastic area.
2. Close the inner cover, and then close the feeder cover.
CAUTION
When closing the covers, be careful not to get your fingers caught, as this may result in personal injury.
4.
Clean the feeder scanning area.
1. Open the feeder.
2. Clean the feeder scanning area.
5.
Clean the resin roller and the surrounding area.
1. Turn the resin roller while turning the feed dial.
2. Clean the area while turning the resin roller.
3. Close the feeder.
CAUTION
When closing the feeder, be careful not to get your fingers caught, as this may result in personal injury.