Replacing the Staple Case (Inner Finisher-G1)

This section describes how to replace the staple case and staple cartridge in the stapler unit. When the Inner Finisher-G1 is almost out of staples and the staple case must be replaced, a screen prompting you to replace the staple case appears on the touch panel display. Follow the procedure described below to replace the staple case.

NOTE
The Inner Finisher-G1 is an optional product. We recommend that you order staple cases from your local authorized Canon dealer before your stock runs out. Use only staple cases intended for use with this machine.

Open the front cover of the finisher.

Pull out the staple cartridge from the finisher.

	1. Push down the green part to unlock the staple cartridge.
	2. Push up the staple cartridge slightly and pull it out.

Pull out the empty staple case from the staple cartridge.

Remove the new staple case from its box.

Insert a new staple case into the staple cartridge.

IMPORTANT
Only one staple case can be inserted at a time.

Push the staple cartridge into the finisher until it clicks into place.

Close the front cover of the finisher.

CAUTION
When closing the front cover of the finisher, be careful not to get your fingers caught, as this may result in personal injury.

NOTE
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition the staples.