Send Features of the WSD Scan - Canon imageRUNNER ADVANCE C3330i/C3325i e-Manual

Send Features of the WSD Scan

This section describes how to use the send function of the WSD Scan.

IMPORTANT

You can only perform a WSD scan under the following conditions:

Place your originals.

IMPORTANT
You cannot scan 2-sided originals even if you are using a feeder. Scan each side of a two-sided original separately. The available scanning size is LTR. For example, if you set 11" x 17" originals, only LTR size is scanned.

NOTE
For instructions on placing originals, see "Placing Originals."

Press [WSD Scan].

Select the destination.

Computers in the same domain in which the driver for the WSD Scan function is installed are listed. Select the desired destination.

Press [Start].

If the destination [Scan to "computer name"] is selected:

A screen prompting you to select a program appears on the computer screen. Scanning is complete after selecting the program.

If the destination other than [Scan to "computer name"] is selected:

Windows Explorer starts and a scanned file is displayed on the computer screen.

NOTE
Up to 40 destinations are displayed. You cannot use [Send for OCR to "computer name"] when selecting the destination. If you want to use the OCR function, see "Searchable PDF/OOXML."