TX REPORT - Canon imageRUNNER ADVANCE C350iF/C250iF e-Manual

TX REPORT

This report can be printed automatically after documents are sent. You can also set the machine to print a TX Report only when a transmission error occurs, and adjust the TX Report setting to print the first part of the document as part of the report to remind you of the document's contents.

The items printed for the report and a description of each item are indicated below.

JOB NO.

The four digit number, that is automatically assigned when the document is accepted for sending, is printed.

DEPT. ID

If Department ID Management is set, the Department ID is printed.

ST. TIME

The date and time (in 24-hour notation) at which the document started to transmit are printed.

SHEETS

The number of pages that were sent is printed.

FILE NAME

The name given to the document when the send settings were specified is printed.

TX INCOMPLETE

If the transmission has been interrupted, the name and address of the destination are printed.

TRANSACTION OK

If the transmission completed successfully, the name and address of the destination are printed.

ERROR

If a sending error occurs, the name and address of the destination are printed.

NOTE
If an image is not attached, <TX IMAGE SET NOT TO DISPLAY> appears below the title. If there is no destination for TX INCOMPLETE, TRANSACTION OK, or ERROR, "---" is printed. If a field exceeds its display capacity, only those characters that fit in the display are printed. A list of fax, e-mail, I-fax, and file server transmissions is printed on the TX Report. However, even if <Report with TX Image> is set to 'On', if the document was sent using the Encrypted PDF mode, the original will not be displayed. Send jobs originating from the fax driver are omitted from this report.

NOTE

If an image is not attached, <TX IMAGE SET NOT TO DISPLAY> appears below the title.

If there is no destination for TX INCOMPLETE, TRANSACTION OK, or ERROR, "---" is printed.

If a field exceeds its display capacity, only those characters that fit in the display are printed.

A list of fax, e-mail, I-fax, and file server transmissions is printed on the TX Report. However, even if <Report with TX Image> is set to 'On', if the document was sent using the Encrypted PDF mode, the original will not be displayed.

Send jobs originating from the fax driver are omitted from this report.

Printing the TX Report

Press

(Settings/Registration).

Press [Function Settings] → [Send] → [Common Settings].

Press [TX Report].

Press [For Error Only] or [On].

Press [Off] if you do not want to print the report.

If you want to print part of the sent document on the TX Report, press [On] for <Report with TX Image>.

NOTE
Even if <Report with TX Image> is set to 'On', the contents of the sent document are not printed on the report if the document was sent using the Encrypted PDF mode.

Press [OK].

NOTE
The results of fax transmissions are printed. In addition, a Fax TX Report is printed with the TX Report, if [Fax TX Report] in [Function Settings] (Settings/Registration) is set to 'For Error Only' or 'On'. (See "FAX TX REPORT/FAX ERROR TX REPORT.")