Fax Line Settings
To use the fax on the machine, register the fax number and company or department name to be displayed/printed at the receiving party's fax machine when sending a fax. Also, set the communication channel type.
1
Press
![](./images/book_images/pubnumbers/008_01_setup_Tiff36_en_US/b_key_Add.gif)
.
2
Press <Function Settings>
![](./images/book_images/b_in_arrow_right.gif)
<Send>
![](./images/book_images/b_in_arrow_right.gif)
<Fax Settings> <Set Line>.
3
Press <Line 1>
![](./images/book_images/b_in_arrow_right.gif)
<Register Unit Telephone Number>.
4
Enter a fax number and press <OK>.
The fax number you registered will be notified to the recipient.
5
Enter a name in <Register Unit Name> and press <OK>.
The name you registered will be notified to the recipient.
6
Select a line type in <Select Line Type>, press <OK>.
If you are not sure what kind of line type you are using, please contact your dealer or the sales office of your telephone company.
|
Configure the setting according to the fax option.
You can edit the line name that is displayed in the line selection screen using <Edit Line Name for Select Line Screen>. <Send> ![](./images/book_images/b_in_arrow_right.gif) <Fax Settings>
You can change the display of the address list according to the selected line in <Default Address List When Selecting Line>. <Send> ![](./images/book_images/b_in_arrow_right.gif) <Fax Settings>
You can set to display a destination's phone number on the screen or report in <Set Number Display>. <Receive/Forward> ![](./images/book_images/b_in_arrow_right.gif) <Fax Settings>
You can set to automatically switch of the incoming fax and incoming call in <Select RX Mode>. <Receive/Forward> ![](./images/book_images/b_in_arrow_right.gif) <Fax Settings>
|
LINKS