Adjusting the Color
|
|
Adjust the density of yellow, magenta, cyan, and black separately.
|
1
Place the original.
Placing Originals
2
Press <Copy> on the Main Menu.
<Main Menu> Screen
3
Press <Options> on the Copy Basic Features screen.
Copy Basic Features Screen
4
Press <Color Balance>.
5
Press <-> or <+> for each color to adjust the color balance.
6
Press <Fine Adjust Density>, and perform other adjustments as necessary.
Select a color and adjust its density level by its density area using the <-> or <+> button. When adjustment is complete, press <OK>.
7
Press <OK>
![](./images/book_images/b_in_arrow_right.gif)
<Close>.
8
Press
![](./images/book_images/pubnumbers/008_04_trk_Tiff36_en_US/b_key_Start.gif)
.
Copying starts.
TIPS
|
You can register up to four settings after adjustment. After adjusting the color, press <Recall/Register> ![](./images/book_images/b_in_arrow_right.gif) select a button from <C1> to <C4> ![](./images/book_images/b_in_arrow_right.gif) press <Register> ![](./images/book_images/b_in_arrow_right.gif) <Yes> ![](./images/book_images/b_in_arrow_right.gif) <OK>.
To recall registered settings, press <Recall/Register>, select a button, and press <OK>.
You can change the button names of <C1> to <C4>. Select the button to change, press <Rename>, and enter a new name.
To delete registered settings, select the button ![](./images/book_images/b_in_arrow_right.gif) press <Delete> ![](./images/book_images/b_in_arrow_right.gif) <Yes>.
|