<Printer>
This section describes the printer settings.
<Output Report>
![](./images/book_images/b_in_arrow_right.gif)
<Function Settings>
![](./images/book_images/b_in_arrow_right.gif)
<Printer>
You can print reports for the machine settings.
<Printer Settings>
![](./images/book_images/b_in_arrow_right.gif)
<Function Settings>
![](./images/book_images/b_in_arrow_right.gif)
<Printer>
Specify the printer settings.
For more information, see Setting the Machine (PS/PCL/UFR II Printer).
<Restrict Printer Jobs>
![](./images/book_images/b_in_arrow_right.gif)
<Function Settings>
![](./images/book_images/b_in_arrow_right.gif)
<Printer>
If this setting is set to <On>, you can restrict jobs from the printer driver.
<PDL Selection (Plug and Play)>
![](./images/book_images/b_in_arrow_right.gif)
<Function Settings>
![](./images/book_images/b_in_arrow_right.gif)
<Printer>
Select default Page Description Language (PDL).
<Prioritize Printer Driver Settings for Jobs with MP Tray>![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
![](./images/book_images/b_in_arrow_right.gif)
<Function Settings>
![](./images/book_images/b_in_arrow_right.gif)
<Printer>
You can prioritize printer driver settings over the paper settings in the machine when printing a job with the multi-purpose tray specified as the paper source.
|
When the following conditions are met, you can press <Temp. Change Ppr. in MP Tray> on the paper selection screen of <Copy> and <Access Stored Files> to change the paper size/type to load from the multi-purpose tray:
If paper is loaded in the multi-purpose tray
If this setting is set to <On>
|
<PS Password Settings>![](./images/global_images/1T0002134966/g_ne_toggle_open.gif)
![](./images/book_images/b_in_arrow_right.gif)
<Function Settings>
![](./images/book_images/b_in_arrow_right.gif)
<Printer>
You can specify the password that restricts the use of the control command prepared by the PS printer.
|
<SystemParamsPassword> is a password that allows changes to the system parameter, and <StartJobPassword> is a password that allows startjob, exitserver operator to perform. For more information, check PostScript language specifications.
|