Registering File Server Addresses in One-touch Keys |
This section describes the procedure for registering file server addresses in the one-touch keys. |
Remark |
|
||||||
|
If a password has been set for the Address Book, enter the password using – [numeric keys], then press [OK]. |
|
You can also select a one-touch key by pressing the corresponding one-touch key. |
<FTP>: Select this protocol if you are sending documents to a computer running Sun Solaris 2.6 or later, Mac OS X, Internet Information Services 5.0 under Windows 2000 Server, Internet Information Services 5.1 under Windows XP Professional, Internet Information Services 6.0 under Windows 2003 Server, Windows 2008 Server, Internet Information Services 7.0 under Windows Vista, or Red Hat Linux 7.2. <SMB>: Select this protocol if you are sending documents to a computer running UNIX/Linux (Samba 2.2.8a or later), or Windows 2000/XP/Server 2003/Vista/Server2008. |
|
|
|
If no DNS server is available, the host name setting should be specified using the IP address of the FTP server. |
|
|
|
You can enter up to 24 characters for the login name. |
|
You can enter up to 24 characters (14 characters when <SMB> is selected as the server protocol) for the password. To register another one-touch key, repeat the procedure from step 4. |
|