1 |
Paper Select indicator
Indicates the selected paper source.
* The number of paper sources varies depending on the model used. |
2 |
Jam Location indicator
Indicates the location of paper jams. |
3 |
Display
Displays messages and prompts during operation. Displays selection, text, and numbers when adjusting the settings. |
4 |
COPY key
Press to switch to the Copy mode. |
5 |
key
Press to decrease the value for various settings. Also press to see the previous item in the menu. |
6 |
SEND key (imageRUNNER 1025iF only)
Press to switch to the Send mode. |
7 |
OK key
Press to determine the contents you set or register. |
8 |
SCAN key
Press to switch to the Scan mode. |
9 |
key
Press to increase the value for various settings. Also press to see the next item in the menu. |
10 |
Reset key
Press to return the machine to the standby mode. |
11 |
System Monitor key
Press to check fax transmission, print, copy, or report output status. |
12 |
View Settings key
Press to confirm settings of the copy function. |
13 |
Numeric keys
Enter letters and numbers. |
14 |
Clear key
Press to clear entered alphanumeric characters. |
15 |
Log In/Out key
Press to operate the machine when the Department ID management is activated.
Also press to enable the Department ID management when you finished using the machine. |
16 |
Start key
Press to start copying, scanning and sending faxes. |
17 |
Counter Check key
Press to display counter status. (Press again to close counter status.) |
18 |
Stop key
Press to cancel machine operations. |
19 |
Power key (operation panel power switch)
Press to turn the operation panel ON/OFF. Also press to enter the Sleep mode or to resume the normal mode from the Sleep mode manually. |
20 |
Main Power indicator
Lights up when the main power is turned on. |
21 |
Error indicator
Flashes or lights up when an error has occurred. |
22 |
Processing/Data indicator
Flashes when the machine is working. Lights up when the machine has waiting jobs. |
23 |
Tone key (imageRUNNER 1025iF only)
Press to switch from rotary pulse to tone dialing. |
24 |
2 on 1 key
Press to set 2 on 1 copying. |
25 |
Frame Erase key
Press to set frame erase for copying. |
26 |
Collate key
Press to set collate copying. |
27 |
Additional Functions key
Press to select or cancel modes in Additional Functions. |
28 |
2-Sided key
Press to set two-sided copying or sending documents. |
29 |
Copy Ratio key
Press to enlarge or reduce copy ratio. |
30 |
Density key
Press to lighten or darken the copies or documents you send. |
31 |
Image Quality key
Press to select image quality for copying and sending documents. |
32 |
Paper Select key
Press to select a paper source (paper drawer or stack bypass). |