*
 
Setting Up the Stamp Action

Return to Overview

Follow this procedure to set up the stamp action when the stamp feature is turned ON.

Remark
  • If you are using the LASER CLASS 830i, this setting is enabled when sending to a fax, I-fax, e-mail, or file server destination.

 
     
  1. Press [Additional Functions].
 
     
  1. Press [] or [] to select <TX/RX SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <FAX SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <TX SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <STAMP DOCUMENT>, then press [OK].
 
     
  1. Press [] or [] to select <DIRECT TX> or <DIRECT&MEMORY TX>, then press [OK].
<DIRECT TX>: Stamps only documents you scan for direct sending.
<DIRECT&MEMORY TX>: Stamps all documents you scan for direct and memory sending.
 
     
  1. Press [Stop] to return to the standby mode.

 
  • Back To Top