Return to Overview

Follow this procedure if you want to change the default remote reception ID of 25.

1. Press [Additional Functions].

2. Press [] or [] to select <TX/RX SETTINGS>, then press [OK].

3. Press [] or [] to select <FAX SETTINGS>, then press [OK].

4. Press [] or [] to select <RX SETTINGS>, then press [OK].

5. Press [] or [] to select <REMOTE RX>, then press [OK].

6. Press [] or [] to select <ON>, then press [OK].

7. Press [Clear] twice to delete the default remote reception ID of 25.

8. Use the numeric keys to enter a new remote reception ID (a combination of two characters using 0 to 9, and #), then press [OK].

9. Press [Stop] to return to the standby mode.

• Back To Top