Return to Overview

If required, change the optional settings as follows:

1. Press [Additional Functions].

2. Press [] or [] to select <TX/RX SETTINGS>, then press [OK].

3. Press [] or [] to select <FAX SETTINGS>, then press [OK].

4. Press [] or [] to select <RX SETTINGS>, then press [OK].

5. Press [] or [] to select <FAX/TEL OPT. SET>, then press [OK].

6. Press [] or [] to select <RING START TIME>, then press [OK].

7. Use [], [], or the numeric keys to specify the duration (0 to 30 seconds) for which the machine attempts to detect the fax tone before it starts ringing, then press [OK].

If the machine receives a fax, the machine does not ring and switches to the receive mode automatically.

8. Press [] or [] to select <F/T RING TIME>, then press [OK].

9. Use [], [], or the numeric keys to specify the duration (15 to 300 seconds) of ringing, then press [OK].

10. Press [] or [] to select <F/T SWITCH ACTION>, then press [OK].

11. Press [] or [] to select the action the machine will take after the ringing ends, then press [OK].

12. Press [Stop] to return to the standby mode.

• Back To Top