Return to Overview

When you dial or register an overseas number, you may need to insert a pause within the number.

1. Set documents.

2. Press [Fax/Send] repeatedly to select <FAX>, then press [OK].

If using the LASER CLASS 810, you can switch to the Fax mode by pressing [Copy/Fax].

3. Use the numeric keys to dial the international access code.

For details on international access codes, contact your local telephone company.

4. If necessary, press [Pause] to insert a pause.

Ex.

The letter <p> is displayed between the numbers.

You can enter successive pauses within the fax number to make the pause time longer.

You can change the length of a pause inserted within the fax number in the <PAUSE TIME> menu. The default setting is two second. (See "TX/RX SETTINGS.")

5. Use the numeric keys to dial the country code, the area code, and the fax/telephone number of the recipient.

6. If necessary, press [Pause] to enter a pause at the end of the number.

The letter <P> appears at the end of the fax number.

Pauses entered at the end of fax numbers are always 10 seconds long.

7. Press [Start].

• When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if you have specified the destination by any other method than using numeric keys, the machine starts scanning automatically without pressing [Start], after the preset time for this setting is elapsed.

• Back To Top