1 2 3 4 5 6 7 8 9 10 > 
 
Setting Automatic Redialing (Fax)

Return to Overview

Automatic redialing enables the machine to automatically redial the recipient's fax number if the recipient cannot be reached due to a busy line, or if a sending error occurs. Auto Redial can be turned <ON> or <OFF>. If you set <AUTO REDIAL> to <ON>, you can set how many times the machine redials the number, and the redial interval.

 
     
  1. Press [Additional Functions].
 
     
  1. Press [] or [] to select <TX/RX SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <FAX SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <TX SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <AUTO REDIAL>, then press [OK].
 
     
  1. Press [] or [] to select <ON>, then press [OK].
 
     
  1. Press [] or [] to select <REDIAL TIMES>, then press [OK].
 
     
  1. Use [], [], or numeric keys to enter the number of redials (1 to 10 times) the machine will make, then press [OK].
 
     
  1. Press [] or [] to select <REDIAL INTERVAL>, then press [OK].
 
     
  1. Use [], [], or numeric keys to enter the time (2 to 99 minutes, in one-minute increments) between redials, then press [OK].
 
     
  1. Press [] or [] to select <TX ERROR REDIAL>, then press [OK].
 
     
  1. Press [] or [] to select <ON> or <OFF>, then press [OK].
<ON>: Resends all pages if an error occurs during transmission.
<OFF>: Does not redial even if an error occurs during transmission.
 
     
  1. Press [Stop] to return to the standby mode.

 
  • Back To Top