*
 
Job Recall/Redial

Return to Overview

You can recall the last three destinations, scan settings, and send settings which have been set, and then send your documents.

Remark
  • With the LASER CLASS 830i, this can be used as a Recall function. With the LASER CLASS 810, this can be used as a Redial function.
  • When <REST. REDIAL/CALL> is set to <ON>, [Recall] is not available. (See "Restricting Job Recall (LASER CLASS 830i Only).")

 
     
  1. Set documents.
 
     
  1. Press [Fax/Send].

If using the LASER CLASS 810, you can switch to the Fax mode by pressing [Copy/Fax].
 
     
  1. Press [Recall].
 
     
  1. Press [] or [] to select <1 BEFORE>, <2 BEFORE>, or <3 BEFORE>, then press [OK].
 
       
  1. Confirm that the desired recipient is displayed.

For information on changing scan settings such as the resolution when using the Recall function, see "Scan Settings."
 
     
  1. Press [Start].
  • When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if you have specified the destination by any other method than using numeric keys, the machine starts scanning automatically without pressing [Start], after the preset time for this setting is elapsed.

 
  • Back To Top