*
 
Forwarding Documents with Forwarding Errors

Return to Overview

Remark
  • To use this function <STORE TO MEMORY> in <FORWARD ERR. SET> in <SYSTEM SETTINGS> must be set to <ON>.

 
     
  1. Press [System Monitor] repeatedly to select <FORWARD ERR. STATUS>, then press [OK].
 
     
  1. Press [] or [] to select the desired document, then press [OK].
 
     
  1. Press [] or [] to select <FORWARD>, then press [OK].
 
     
  1. Specify the destination, then press [OK].

The machine starts to send the selected document.

  • You can specify only one destination registered in a one-touch key or coded dial code.
  • The document is erased from memory if transferring is successful.

 
  • Back To Top