*
 
Checking and Deleting Print Jobs

System monitor enables you to monitor the status of the print jobs currently being processed.

Remark
  • Make sure that the Processing/Data indicator is turned on. When the Processing/Data indicator is turned off, all print jobs are erased from the memory.
  • To print from a computer with the LASER CLASS 810, an optional network printer kit is required.

 
     
  1. Press [System Monitor] repeatedly to select <PRINT STATUS>, then press [OK].
 
     
  1. Press [] or [] to scroll through the job list, and check the status of the print jobs.

If you want to delete the job, go to step 3. Otherwise, press [Stop] to return to the standby mode.
 
     
  1. Press [] or [] to select the desired job, then press [OK].
 
     
  1. Press [] or [] to select <CANCEL>, then press [OK].
 
     
  1. Press [] to select <YES>.

If you do not want to cancel the job, press [] to select <NO>.
 
     
  1. Press [Stop] to return to the standby mode.

 
  • Back To Top