The default settings is <LTR> and <PLAIN PAPER>. When you place other sizes and/or types of paper, follow this procedure to change the settings.
The procedure is same for the paper cassette and multi-purpose tray except for selecting the paper cassette or multi-purpose tray in step 3 and 6.

1. Press [Additional Functions].

2. Press [] or [] to select <PAPER SETTINGS>, then press [OK].

3. Press [] or [] to select <CASSETTE1> or <MP TRAY>, then press [OK].

• If an optional paper cassette is attached, you can also select <CASETTE2>.

4. Press [] or [] to select <PAPER SIZE>, then press [OK].

5. Press [] or [] to select the paper size, then press [OK].

You can select from the following paper sizes:

If you select <CASETTE 1> or <CASETTE 2> in step3:
<LTR>, <LGL>, <A4> ,<OFICIO>, <BRAZIL-OFICIO>, <MEXICO-OFICIO>, <FLSP>

If you select <MP TRAY> in step3:
<LTR>, <LGL>, <A4>, <B5>, <A5R>, <STMTR>, <EXECUTIV>, <COM10>, <MONARCH>, <DL>, <ISO-C5>, <ISO-B5>, <OFICIO>, <BRAZIL-OFICIO>, <MEXICO-OFICIO>, <FOLIO>, <G-LTR>, <G-LGL>, <FLSP>, <CUSTOM SIZE>*

*When selecting this size, enter the height, and press [OK].
Enter the width, and press [OK].

• The paper sizes available will vary depending on the country where the unit was purchased.

6. Press [] or [] to select <SELECT PAPER TYPE>, then press [OK].

• If you have selected <EXECUTIV>, <COM10>, <MONARCH>, <DL> or <ISO-C5> for the paper size in step 5, <SELECT PAPER TYPE> is not displayed. Skip to step 8.

7. Press [] or [] to select the paper type, then press [OK].

You can select from the following paper types:

If you select <CASETTE 1> or <CASETTE 2> in step3:
<PLAIN PAPER>, <COLOR>, <RECYCLED>, <HEAVY PAPER1>, <BOND>, <3 HOLE PUNCH PAPER>

If you select <MP TRAY> in step3:
<PLAIN PAPER>, <COLOR>, <RECYCLED>, <HEAVY PAPER 1>, <HEAVY PAPER 2>, <HEAVY PAPER 3>, <BOND>, <3 HOLE PUNCH PAPER>, <TRANSPARENCY>, <LABELS>, <ENVELOPE>

8. Press [Stop] to return to the standby mode.

• Back To Top