1 2 3 4 5 6 7 8 9 
 
ACTIVITY REPORT

Return to Overview

 
     
  1. Press [Additional Functions].
 
     
  1. Press [] or [] to select <REPORT SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <ACTIVITY REPORT>, then press [OK].
 
     
  1. Press [] or [] to select <AUTO PRINT>, then press [OK].

If TX Document Archiving is set to <ON>, the activity report is automatically set to be printed every 40 transmissions, and the settings under <AUTO PRINT> are not displayed. Proceed to step 7.
 
     
  1. Press [] or [] to select the setting you want, then press [OK].
<OUTPUT YES>: Prints a report after every 40 transactions.
<OUTPUT NO>: Does not print a report. Skip to step 9.
 
     
  1. Press [] or [] to select <TX/RX SEPARATE>, then press [OK].
 
     
  1. Press [] or [] to select the setting you want, then press [OK].
<OFF>: Prints a report with the transmission and reception results listed chronologically.
<ON>: Prints a report with the transmission and reception results separated in a report.
 
     
  1. Press [Stop] to return to the standby mode.

 
  • Back To Top