Return to Overview

• To use a printer driver and fax driver with the LASER CLASS 810, an optional network printer kit is required.

If the CD-ROM Setup screen is not displayed, click [start] on the Windows task bar → [My Computer].

Windows Vista: click [start] on the Windows task bar → [Computer].

Windows 98/Me/2000: double-click [My Computer] on the Windows desktop.

Open the CD-ROM icon, then doubleclick [MInst] ([MInst.exe]).

Select the driver(s) you want to install.

• The following indicates the procedure for installing the UFR II Printer Driver, PCL Printer Driver, and Fax Driver all together. (The PCL Printer Driver is only available for the LASER CLASS 830i.)

• If you want to install only the PCL driver, it is necessary to change the settings of the machine. See "SYSTEM SETTINGS" for information on the settings you must change. After changing the settings, follow steps 4 to 12 to install the driver using the same procedure as for the UFR II Printer Driver.

• If you want to install only the fax driver, refer to the procedure for installing with a USB connection included in the Fax Driver Guide (located on the User Software CD).

Attach the ferrite core (A) as close to the square B-type connector (i.e., the machine side) of the USB cable (B) as possible.

• The ferrite core is installed in order to reduce noise emitted from the cable.

Connect the machine and your computer with a USB cable (C).

Connect the machine to the network correctly, and confirm that the power is on.

• If you are using Windows XP, [Found New Hardware Wizard] dialog box appears. Select [Install Software Automaticall (Recommended)], then click [Next].

Proceed to the step indicated below that corresponds to the drivers you selected in step 3.

• Only the UFR II Printer Driver: proceed to step 35

• UFR II Printer Driver and PCL Printer Driver: proceed to step 14

• UFR II Printer Driver, PCL Printer Driver, and Fax Driver: proceed to step 14

• UFR II Printer Driver and Fax Driver: proceed to step 24

Select [Canon LC800/L3000 PCL5e] and/or [Canon LC800/L3000 PCL6].

The selected drivers are installed.

Select the USB port that was created when you installed the UFR II Printer Driver.

If you selected to install Fax Driver in step 3, proceed to step 25. If you did not select the Fax Driver in step 3, proceed to step 35.

Select the USB port that was created when you installed the UFR II Printer Driver.

You have now completed installation.

• Back To Top