LASER CLASS 810/830i Reference Guide - Connect the Machine to a Network (Set the Machine for Network Usage)

Connect the Machine to a Network (Set the Machine for Network Usage)

This machine has a USB connector and LAN connector. If the machine is connected to a network using a LAN cable, you can print the documents sent from a computer, send documents to a file server, i-fax and send document attached to an e-mail through a network.

Remark


	To use a network environment with the LASER CLASS 810, an optional network printer kit is required.

Connect a Category 5 twisted pair LAN cable to the 10Base-T/100Base-TXport on the back of the machine. Connect the other end of the cable to a network router or a hub.

If you use the machine as a local printer, connect the machine directly to a computer using a USB cable. (See "Installing Software.")