1 2 3 4 5 6 7 8 9 10 
 
Install Toner Cartridge

Return to Overview

 
     
  1. Remove the toner cartridge from the bag. Keep the bag for future use.
  • Do not open the drum protective shutter (A).
 
     
  1. Gently rock the toner cartridge 5 or 6 times to distribute toner evenly.
 
     
  1. Remove the seals (2 places).
 
     
  1. Bend back the blue plastic pull tab as in the illustration above.
  • Do not remove the pull tab as it is used to pull out the toner when the cartridge needs replaced.
 
     
  1. Pull out the seal completely.
  • Do not pull out the seal at an angle.
 
     
  1. Open the left cover.
 
     
  1. Hold the toner cartridge by its handle. Insert the toner cartridge into the machine with the arrows (A) on the toner cartridge pointing toward the machine.
 
     
  1. The left edge (A) and the right side protrusions (B, C) of the toner cartridge should be aligned with the guides inside the machine. The Blue plastic pull tab should be pulled up as illustrated in step 4.
 
     
  1. Push the toner cartridge to make sure it is properly set in the machine.
  • Do not touch the fixing assembly (A) as it becomes very hot during use.
 
     
  1. Close the left cover.
  • Be careful not to get your fingers caught.
  • If you cannot close the left cover, do not force it to close. Open the cover and make sure the toner cartridge is properly set in the machine.

 
  • Back To Top