Return to Overview

If the machine remains idle for a certain period of time, the display returns to standby mode (Auto Clear function).

1. Press [Additional Functions].

2. Press [] or [] to select <TIMER SETTINGS>, then press [OK].

3. Press [] or [] to select <AUTO CLEAR TIME>, then press [OK].

4. Confirm that <ON> is displayed, then press [OK].

5. Press [] or [] to select the desired interval, then press [OK].

You can set the interval from 1 to 9 minutes (in one-minute increments).

You can also enter values using numeric keys.

6. Press [Stop] to return to standby mode.

• Back To Top