| ADJUST./CLEANING |
| ADJUST./CLEANING | |
| Setting Item | Description |
| 1. TRANS. ROLR CLEAN | Cleans the transcription roller. (See "Transcription Roller.") |
| 2. FIX.UNIT CLEANING | Cleans the fuser roller. (See "Fuser Roller") |
| 3. FEEDER CLEANING | Cleans the ADF. (See "Cleaning the ADF Automatically.") |
| 4. SPECIAL MODE M | Sets to improve print quality or fix irregular print density. If print quality decreases or an irregularity in the print density appears, transcription output may not function adequately. |
MID |
Selects in normal conditions. |
LOW |
Selects to compensate for poor print quality that occurs when using paper that was stored for a long time at high temperatures and high humidity. |
HIGH |
Selects to compensate for poor quality that occurs when using heavyweight paper. |
| 5. SPECIAL MODE N | When the two-sided printing function is used, paper may curl severely or become jammed. Enable this setting to prevent paper curling or jamming.
|
| 6. SPECIAL MODE P | Sets to activate when lightweight paper or paper which is easy to get uneven print density is used for printing.
|
| 7. SPECIAL MODE Q | Enable this setting if black or white spots appear on the printed image.
|
| 8. SPECIAL MODE R | Sets whether to prevent white streaks from appearing on the printed image. When you print the halftone image or photograph after the machine has not undergone any operation for a while, the first page of printouts may have thin white streaks on the printed image.
|
| 9. SPECIAL MODE S | Sets whether to reduce the waiting time for the next printout. When you change the paper size after continuous printing, the machine may take a while to start the next printing. |
OFF |
Does not reduce the waiting time next set of printout. (default) |
SPEED PRIORITY |
Reduces the waiting time to start the next set of printout. Print speed has priority; however, a condition that an previously printed image also appears faintly on the next output may occur. |
| 10. CONT. PRINT MODE | Sets whether to prevent the back edge of the previous page from appearing on the following page during continuous printing of half-tone prints or photographs.
|
| 11. BACK EDGE MODE | Sets whether to prevent back edge of paper from smudging.
|
| 12. LARGE PAPER MODE | Sets whether to improve toner fix on large-sized paper.
|
| 13. AUTO ADF DRTY ADJ | Sets whether to activate smudge (due to dust or dirt) reduction during printing. When the ADF is dirty, copies may contain unwanted dots or lines.
|
| 14. MAINTENANCE CODE | This setting is not functional in this model. |