*
 
Auto Zoom

You can set to automatically enlarge/reduce the original according to a specified paper size when copying. The zoom ratio can be set from 50% to 145%.

Remark
  • When this setting is enabled, if you are using the LASER CLASS 810, you must specify the original size when copying.

 
     
  1. Press [Additional Functions].
 
     
  1. Press [] or [] to select <COPY SETTINGS>, then press [OK].
 
     
  1. Press [] or [] to select <AUTO ZOOM>, then press [OK].
 
     
  1. Press [] or [] to select <ON>, then press [OK].
 
     
  1. Press [Stop] to return to the standby mode.

 
  • Back To Top