1 2 3 4 5 6 
 
2 to 1-Sided Copying

Return to Overview

You can make one-sided copies from two-sided documents.

 
     
  1. Set documents.
 
     
  1. Press [Copy].

If using the LASER CLASS 810, you can switch to the Copy mode by pressing [Copy/Fax].
 
     
  1. Press [2-Sided] repeatedly to select <2> 1-SIDED>, then press [OK].
 
     
  1. Use [] or [] to select <BOOKTYPE> or <CALENDARTYPE>, then press [OK].
  • If using the LASER CLASS 830i:
When images in documents are set vertically as illustrated on the right, select the desired output.

<BOOK TYPE>: Select if images on the back side of a document have the same top-bottom orientations as the front side of the document.
<CALENDAR TYPE>: Select if images on the front and back sides of a document have opposite top-bottom orientations.
  • When images on 11x17 landscape documents are orientated horizontally, select <BOOK TYPE> if the images on the front and back sides of the document have opposite orientations. Select <CALENDAR TYPE> if images on the front and back sides of a document have the same orientations.
  • If using the LASER CLASS 810:
When images in documents are set horizontally as illustrated on the right, select the desired output.

<BOOK TYPE>: Select if images on the back side of a document have the same top-bottom orientations as the front side of the document.
<CALENDAR TYPE>: Select if images on the front and back sides of a document have opposite top-bottom orientations.
  • For landscape documents, such as LTRR documents, with an image set vertically, the images on the front and back sides of the document will have opposite top-bottom orientations when <BOOK TYPE> is selected. When <CALENDAR TYPE> is selected, the front and back sides of the document will have the same top-bottom orientations.
 
     
  1. Use the numeric keys to enter the desired copy quantity (1 to 99).
 
     
  1. Press [Start].

To cancel all settings, press [Stop].

 
  • Back To Top