Follow this procedure to make a copy.

1. Load the document in the ADF.

For documents you can copy, see "Document Requirements."

2. Press [Copy].

If using the LASER CLASS 810, you can switch to the Copy mode by pressing [Copy/Fax].

• You want to adjust the image quality and density:
  See "Scan Settings."

• To copy using paper loaded in the multi-purpose tray or the optional paper cassette:
  Press [Paper Select], and select the paper type.

3. Use the numeric keys to enter the desired copy quantity (1 to 99).

• You enter a wrong number:
  Press [Clear], and enter a new number.

4. Press [Start].

• You want to cancel copying:
  Press [Stop] on the operation panel.
  When the <STOP KEY PRESSED> message appears, press [OK].
  When the<CANCEL?>message appears, press [] to select <YES>.

• If <ORIGINAL SIZE> is displayed after you press [Start]:
  Press [] or [] to specify the original size.

• Back To Top