e-Manual TopContentsHelpGlossary
Category
Top » Maintenance » Cleaning the Machine » Cleaning the Feeder

Category Top

Cleaning the Machine

Cleaning the Exterior

Cleaning the Fixing Unit

Cleaning the Platen Glass

Cleaning the Feeder

Cleaning the Feeder Automatically

Attention (Cleaning the Machine)

Replacing Toner Cartridges

Before Replacing the Toner Cartridge

Replacing the Toner Cartridge

Attention (Replacing the Toner Cartridge)

Adjusting the Machine

Correcting Copy Images

Attention (Correcting Copy Images)

Adjusting the Density

Adjusting Black Text in Color Documents (Black Text Processing Adjustment in Color Documents)

Special Mode

Relocating the Machine

Attention (Relocating the Machine)

Collapse all|Expand all
Cleaning the Feeder
07K4-0W8
See "Attention (Cleaning the Machine)" in advance.
If your document has black streaks or appears dirty after it has been scanned from the feeder, the rollers inside the feeder may be dirty. Clean the feeder's scanning area and rollers.
1
Turn OFF the power switch and disconnect the power cord.
2
Open the feeder cover.
3
Clean the rollers (A) inside the feeder with a well wrung out cloth dampened with water and wipe them with a soft, dry cloth.
4
Close the feeder cover.
5
Connect the power cord and turn ON the power switch.