e-Manual
|
Top ContentsHelpGlossary |
||
|---|---|---|---|
|
Category
|
|
Category Top
Setting the System Manager InformationAttention (Specifying the System Manager Information)Registering the Name of the Machine and Location 
Specifying the Setting for Department ID ManagementRegistering DepartmentsEditing DepartmentsActivating the Department ID ManagementSpecifying Whether or Not to Receive a Print Job from an Unknown IDChecking or Clearing the Count InformationSpecifying Keys and Certificates/CA CertificatesGenerating Keys and CertificatesInstalling Keys and Certificates/CA CertificatesVerifying Keys and Certificates/CA CertificatesRegistering Keys and Certificates/CA CertificatesDeleting Keys and Certificates/CA CertificatesSpecifying SSLSetting IEEE802.1X AuthenticationSetting TLS Authentication InformationSetting TTLS/PEAP Authentication InformationSwitching On/Off for IEEE802.1X AuthenticationChecking Error Information for IEEE802.1X AuthenticationAttention (IEEE802.1X Authentication)Entering PIN for Printing (Secure Printing) Setting Secure PrintingPrinting by Secure PrintingConfiguring the Remote UIRestricting Network ConnectionsRestricting Sending/Receiving to/from Specific IP AddressesRestricting Sending/Receiving to/from Specific MAC AddressesMonitoring/Controlling Devices by SNMP (SNMP Setting)Setting SNMPv1Setting SNMPv3Obtaining Printer Management Information from HostSetting the Permission for HTTP CommunicationsSetting Protocol Port NumbersSetting the Dedicated PortRestricting to Specify Destinations and Use the Sending Functions Setting a PIN for the Address BookRestricting Destinations that Can Be SpecifiedRestricting to Send Faxes from Your Computer Restricting Sending from Job HistoryConfirming the Entered Fax Number Restricting Sequential BroadcastsSpecifying Display Settings for the Job HistoryRestricting USB Port or USB Memory UsageRestricting External Device Connections via USBRestricting Storing of Data in Memory MediaRestricting Printing of Data in Memory Media|
IMPORTANT
|
|
If you use department ID management
You need to specify both the system manager ID and PIN to restrict the operation of <System Settings> in the operation panel or the operation of Remote UI. Otherwise, all users are recognized as the administration user, and every user can use <System Settings> on the operation panel and the Remote UI without restriction.
|
|
NOTE
|
|
Specifying the system manager ID and system manager PIN
A number up to 7 digits can be specified.
If the number is less than 7 digits
Example: when you enter <321>, the number is specified as <0000321>. If you register numbers that start from <0>
Example: when you enter <02> <002>, the number is specified as <0000002>. You cannot register numbers that consist of only <0> consecutively such as <00>.
|
| © CANON Inc. 2012 All Rights Reserved. | Disclaimer CopyrightTrademarksOffice LocationsUSRM2-1719 (00) |
|---|