e-Manual TopContentsHelpGlossary
Category
Top » Fax » Using the Fax Functions » Receiving Faxes » Advanced Settings for the Fax/Tel Auto Switch Mode

Category Top

Using the Fax Functions

Preparing to Use the Fax Functions

Registering Destinations in the Address Book

Basic Sending Procedure

Basic Procedures for Sending Faxes

Specifying Destinations

Changing the Scan Settings (Fax)

Canceling Fax Jobs

Redialing (Manual Redialing)

Attention (Manual Redialing)

Useful Features

Notifying the Recipient of an Incoming Fax by Telephone (Manual Sending)

Attention (Manual Sending)

Push-button Telephone for Tone Dialing

Attention (Push-button Telephone for Tone Dialing)

Sending a Fax Abroad (Adding Pauses)

Sending to Multiple Destinations at a Time (Sequential Broadcast)

Attention (Sequential Broadcast)

Changing the Default Fax Settings

Changing Fax Settings (Settings that Can Be Specified Using the [Menu] Button)

Configuring Send Settings

Register Unit Telephone Number
Select Line Type
Off-Hook Alarm
Change Defaults
Register Unit Name (Fax)
ECM TX
Pause Time
Auto Redial
Sender ID
Check Dial Tone Before Sending

Configuring System Settings

TX Start Speed
Address Book PIN
Restrict New Destinations
Allow Fax Driver TX
Restrict History TX
Fax No. Confirmation Re-Entry
Restrict Sequential Broadcast

Receiving Faxes

RX Mode

Changing the Receive Mode

Advanced Settings for the Fax/Tel Auto Switch Mode

Forwarding Fax Documents

Setting Document Transfer (Automatic Forwarding)

Configurating Operations for Transfer Errors

Re-forwarding/Printing/Deleting Documents in Which Transfer Is Failed

Forwarding Received Faxes Stored in Memory to Other Destinations (Manual Forwarding)

Managing Faxes Stored in Memory

Checking and Canceling Fax Jobs

Combining and Printing the Received Documents You Saved

Checking and Deleting Received Faxes

Checking the History of Received/Sent Faxes

Changing Fax Settings (Settings that Can Be Specified Using the [Menu] Button)

Configuring Receiving Settings

ECM RX
Incoming Ring
Remote RX
Auto RX Switch
2-Sided Printing
Reduce RX Size
RX Page Footer
Continue Printing When Toner Is Low

Configuring System Settings

RX Start Speed
Memory Lock Settings
Select Country/Region

Using PC Fax

Preparation to Use PC Faxing

System Requirements (PC Fax)

Where to Find Help (PC Fax)

Faxing Fundamentals (PC Fax)

Faxing (PC Fax)

Specifying the Default Fax Settings (PC Fax)

Setting Up the Fax Configuration (PC Fax)

Viewing the Online Help (PC Fax)

Useful Fax Functions (PC Fax)

Attaching a Cover Sheet (PC Fax)

Using the Address Book (PC Fax)

Registering a Profile for Faxing

Selecting a Profile for Faxing

Registering a Person in an Address Book (PC Fax)

Registering a Group in an Address Book (PC Fax)

Importing Address Book Entries (PC Fax)

Exporting Address Book Entries (PC Fax)

Changing the Address Book Export Destination (PC Fax)

Collapse all|Expand all
Advanced Settings for the Fax/Tel Auto Switch Mode
07K4-08A
Set the advanced settings for the Fax/Tel Auto Switch mode.
1
Press [].
2
Select <RX Mode> using [] or [] and press [OK].
3
Select <Fax/Tel Auto Switch> using [] or [] and press [OK].
4
Select the option using [] or [] and press [OK].
<Ring Start Time>
Set the duration during which the machine tries to detect fax tones before the telephone starts ringing.
Set the duration somewhere between 5 to 30 seconds and press [OK].
<Incoming Ring Time>
Set the duration during which the telephone keeps ringing when an incoming call comes.
Set the duration somewhere between 15 to 300 seconds and press [OK].
<Action After Ring>
Specify how the machine behaves when an incoming call is not answered.
Select <End> or <RX> and press [OK].
<End>: Disconnect the call.
<RX>: Receive an incoming fax.
5
Select <Apply> using [] or [] and press [OK].
The changes are saved.