N on 1 - Canon imagePRESS C10000VP/C8000VP e-Manual

e-Manual	Top Site map Help
	PreviousNextPrint this topic

N on 1

0S9Y-0EC

This mode enables you to output multiple scanned originals or two-sided originals arranged on one sheet of paper. You can select 2, 4, or 8 scanned originals to arrange on the page. You can also set two-sided copies and change the layout and order of images.

The originals are reduced automatically to fit the specified copy size.

2 On 1

This setting reduces two 1-sided originals or one 2-sided original to fit on one side of a sheet of paper.

4 On 1

This setting reduces four 1-sided originals or two 2-sided originals to fit on one side of a sheet of paper.

8 On 1

This setting reduces eight 1-sided originals or four 2-sided originals to fit on one side of a sheet of paper.

IMPORTANT
Originals must all be the same size.

Press

(Main Menu) → [Copy].

Press [Options] → [N on 1].

Select the type of N on 1.

If you want to perform two-sided copying, press [2-Sided Settings] → select the type of two-sided copying → press [OK].

If you want to select the orientation for the copies → press [Set Details] on the <2-Sided> screen → select the orientation for the copies → press [OK].

Copy Orientation

[Book Type]:	The front and back sides of the original have the same top-bottom orientation.
[Calendar Type]:	The front and back sides of the original have opposite top-bottom orientations.

To select the order of the layout, press [Set Details]. Select the order of the layout → press [OK].

If you do not change the settings by pressing [Set Details], the order of the layout is as follows:

2 on 1	Left → Right
All other options except 2 on 1:	Upper Left → Upper Right → Lower Left → Lower Right

To specify the original size, press [Change] for <Original Size> → select the size → press [OK].

To change the paper size, press [Change] for <Paper Size> → select the paper size → press [OK].

NOTE
The machine automatically selects the copy ratio depending on the selected paper size. If you set [N on 1], the Center Shift mode is also automatically set.

Press [OK] → [Close].

IMPORTANT
Printing performance may not be optimal, depending on the combination of settings.