Adjusting the Trimming Width
This function enables you to adjust the trimming width of Saddle Stitch printouts in 0.04" (0.1 mm) increments for each paper size.
This mode can be set when the Booklet Trimmer-D1 is attached to the Saddle Finisher-AM2. For information on the Booklet Trimmer-D1, see the manual provided with the optional product.
1.
Press
(Settings/Registration).
2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Adjust Trim Width].
3.
Enter the trimming width using the keys on the touch panel display → [OK].
