Double Staple Width Adjustment
You can adjust the double staple width.
This mode can be set when the Saddle Finisher-AM2 is attached. (See "Finisher-AM1/Saddle Finisher-AM2/Puncher Unit-BS1/Puncher Unit-BT1.")
1.
Press (Settings/Registration).
2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Adjust Double Staple Width].
3.
Press [-] or [+] to adjust the staple width → [OK].
» Adjustment for Image Quality and Finishing (Calibration) » Adjust Action » Double Staple Width Adjustment
0L3X-0KH