Saddle Stitch Fold Placement Adjustment
If you are using the Saddle Stitch mode of the Saddle Finisher-AM2, and you notice that the folds of the paper are not exactly in the middle of the booklet, you can make adjustments to the saddle stitch fold placement to compensate for this error.
This mode enables you to adjust the folding position without changing the stapling position.
This mode can be set when the Saddle Finisher-AM2 is attached. (See "Finisher-AM1/Saddle Finisher-AM2/Puncher Unit-BS1/Puncher Unit-BT1.")
IMPORTANT
If the Saddle Finisher-AM2 is attached to the machine, you can adjust both the stitch position and the fold placement.
If you want to adjust both the stitch position and the fold placement, adjust the stitch position first, and then adjust the fold placement. To adjust the stitch position, see "Saddle Stitch Position Adjustment."

1.
Press (Settings/Registration).
2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Adjust Saddle Stitch Fold Position].
3.
Adjust the saddle stitch fold placement by pressing [] or [] → press [OK].
» Adjustment for Image Quality and Finishing (Calibration) » Adjust Action » Saddle Stitch Fold Placement Adjustment
0L3X-0KF