e-ManualTopSite mapHelp

Category Top

What This Machine Can Do

The Touch Panel Display

Setting the Main Menu Screen

Shortcut to Settings/Registration

Setting Each Function Screen

Touch Panel Key Display

Adjusting the Brightness of the Touch Panel Display

Adjusting the Position and Angle of the Touch Panel Display

Entering Characters from the Touch Panel Display

Entering Characters Using a USB Keyboard

Entering the Department ID and PIN

Login Service

Placing Originals

Platen Glass

Feeder

Loading Paper into the Stack Bypass-B1

Loading Envelopes into the Stack Bypass-B1

Loading Paper with the Stack Bypass Alignment Tray-C1

Available Paper Stock

Inserting and Removing Memory Media

Tone Settings

Energy Saving Features

Checking the Counter and Controller Version

Conveying Messages Using the Message Board

Remote Operation

Other Useful Functions

Adding New Functions

Installing System Options/MEAP Applications (Delivery)

Installing System Options/MEAP Applications (Manual)

Displaying the Installation Log

Performing a Communication Test With the Delivery Server

Updating Firmware

Printing Reports

Counter Report

PAGE COUNT LIST

PRINT LOG LIST

DEVICE INFORMATION DELIVERY DESTINATION LIST

DEVICE INFORMATION COMMUNICATION LOG REPORT

SEND JOB LIST

TX REPORT

FAX TX REPORT/FAX ERROR TX REPORT

FAX MULTI TX REPORT

COMMUNICATION MANAGEMENT REPORT TX/RX

FAX ACTIVITY REPORT TX/RX

Forwarding Conditions List

Registered LDAP Server List

ADDRESS LISTS

Store Log Report

User Data List

System Information

Mail Box File List

IPSec Policy List

Printer Report

Initialize All Data/Settings Report

Top » Basic Operations » Energy Saving Features
Energy Saving Features
0L3X-01L
You can conserve power efficiently when the machine is not being used by using the following modes.
Auto Sleep Mode
You can set the machine to enter the Sleep mode whenever you desire, by pressing (Energy Saver), or specify to have the machine enter the Sleep mode at a preset time. To reactivate the machine, press (Energy Saver) again.
Energy Saver Mode
The Energy Saver mode conserves energy by lowering the temperature of the fixing unit when the machine is not used for a prolonged period of time. You can set the machine to enter the Energy Saver mode by pressing (Energy Saver) on the control panel. To reactivate the machine, press (Energy Saver) again.
NOTE
The Energy Saver mode's energy conservation level can be set to '-10 %', '-25 %', '-50 %', or 'Zero Restore Time'. The default setting is '-10 %'. (See "Changing the Energy Saver Mode.")
Auto Sleep Weekly Timer
The machine automatically enters the Sleep mode at the specified time and day of the week set with the auto sleep weekly timer. To reactivate the machine, press (Energy Saver).
IMPORTANT
Even if the main power switch is turned OFF, a small amount of energy is consumed if the power plug is left inserted into the power outlet. If you do not want any energy consumed, remove the power plug from the power outlet.
NOTE
For more information on the mode which activates after (Energy Saver) is pressed, see "Switching Modes Activated After Pressing Energy Saver Key."
The touch panel display turns OFF when the machine enters the Sleep mode.
The machine can continue to receive I-fax documents, and process or print data sent from computers even if it is in the Sleep mode.
The machine may not enter the Sleep mode completely, depending on certain conditions. For more information, see "Energy Consumption in the Sleep Mode."
Press (Energy Saver) to enter the Sleep mode when not using the machine for a prolonged period of time, for example, at night.
The time it takes for the machine to automatically enter the Sleep mode can be set from 20 seconds to 4 hours. The default setting is '5' minutes. (See "Auto Sleep Time.")
If a Macintosh, which has been turned OFF, is connected to the machine via a USB cable, when you turn the machine ON, the Macintosh may also turn ON. In this case, disconnect the USB cable. You may also be able to solve this problem by using a USB hub between the machine and the computer.
The Auto Sleep Weekly Timer settings can be set from Sunday to Saturday and 00:00 to 23:59. (See "Auto Sleep Weekly Timer Settings.")
If you select [Low] for [Sleep Mode Energy Use], it may take approximately 10 seconds for the touch panel display to appear after pressing (Energy Saver). (See "Energy Consumption in the Sleep Mode.")
Back to Top