e-ManualTopSite mapHelp

Category Top

What This Machine Can Do

The Touch Panel Display

Setting the Main Menu Screen

Shortcut to Settings/Registration

Setting Each Function Screen

Touch Panel Key Display

Adjusting the Brightness of the Touch Panel Display

Adjusting the Position and Angle of the Touch Panel Display

Entering Characters from the Touch Panel Display

Entering Characters Using a USB Keyboard

Entering the Department ID and PIN

Login Service

Placing Originals

Platen Glass

Feeder

Loading Paper into the Stack Bypass-B1

Loading Envelopes into the Stack Bypass-B1

Loading Paper with the Stack Bypass Alignment Tray-C1

Available Paper Stock

Inserting and Removing Memory Media

Tone Settings

Energy Saving Features

Checking the Counter and Controller Version

Conveying Messages Using the Message Board

Remote Operation

Other Useful Functions

Adding New Functions

Installing System Options/MEAP Applications (Delivery)

Installing System Options/MEAP Applications (Manual)

Displaying the Installation Log

Performing a Communication Test With the Delivery Server

Updating Firmware

Printing Reports

Counter Report

PAGE COUNT LIST

PRINT LOG LIST

DEVICE INFORMATION DELIVERY DESTINATION LIST

DEVICE INFORMATION COMMUNICATION LOG REPORT

SEND JOB LIST

TX REPORT

FAX TX REPORT/FAX ERROR TX REPORT

FAX MULTI TX REPORT

COMMUNICATION MANAGEMENT REPORT TX/RX

FAX ACTIVITY REPORT TX/RX

Forwarding Conditions List

Registered LDAP Server List

ADDRESS LISTS

Store Log Report

User Data List

System Information

Mail Box File List

IPSec Policy List

Printer Report

Initialize All Data/Settings Report

Top » Basic Operations » The Touch Panel Display » Adjusting the Position and Angle of the Touch Panel Display
Adjusting the Position and Angle of the Touch Panel Display
0L3X-013
You can adjust the position and angle of the control panel. Adjust the position and angle of the control panel if the touch panel display cannot be seen clearly.
1.
Hold the control panel with both hands, as shown below.
2.
Slowly adjust the position of the control panel.
You can adjust the angle, as indicated below. If you exceed the adjustment range in any direction, you could break the arm that supports the control panel.
3.
Slowly adjust the angle of the control panel.
You can adjust the angle, as indicated below. If you exceed the adjustment range in any direction, you could break the arm that supports the control panel.
Back to Top