Canon PS3 Printer PPD File for macOS
This guide explains the installation and setup procedures of the interim PostScript printer driver for macOS.
Read this guide carefully before installing and using the printer driver.
IMPORTANT:
Canon Inc. does not hold responsibility for any probable trouble associated with unexpected printing behaviors due to restrictions incurred upon the interim printer driver. Install and use the interim printer driver at your own risk.
Contents
Installing PostScript Printer Description (PPD) Files
<Destination Folder for Installation>
Startup disc/Library/Printers/PPDs/Contents/Resources/
NOTE:
When installing, you may need enter an administrator's name and password.
Use the following procedure to install the PPD files.
Installing PPD files
1.
Open the [PS_PPD] folder.
NOTE:
If you have downloaded the driver from the Canon web site, part of the folder structure may differ.
2.
Copy the [CNxxxxX1.PPD.gz] PPD file corresponding to the printer you are using to the following folder.
/Library/Printers/PPDs/Contents/Resources/
NOTE:
If an authentication warning is displayed, perform the authentication procedure.
Installation is complete.
Setting Up a PostScript Printer
You can set up your interim PostScript printer driver as an LPR printer that uses an IP address, or USB connected printer on macOS.
Refer to the macOS help and consult your network administrator to select either way.
NOTE:
Network options should be properly configured on macOS and your printer in advance.
Use the following procedure to set up the printer.
1.
Open [System Preferences] and click [Printers & Scanners].
2.
Click [+].
3.
Select the printer connection method.
For an IP connection:
Select [IP (the center icon) ] on the top of the dialog box.
For a USB connection:
Select [Default (the left icon) ] on the top of the dialog box.
4.
Specify the printer you are going to use.
For an IP connection:
Select [Line Printer Daemon – LPD] from [Protocol], and enter the printer's IP address or DNS name. Enter the print connection name in [Queue].
NOTE:
Enter the correct product name of the printer you are using for the print connection name.
For a USB connection:
Select a printer that has [USB] displayed in the [Kind] column.
5.
Select [Select Software] from the [Print Using]/[Use] pop-up menu.
NOTE:
If you want to choose a PPD stored in a desired location, select [Other], then choose the PPD for the printer you are using and click [Open].
6.
From the driver name list, select the driver name ([Canon xxxx PPD]) that corresponds to the printer you are going to use, and click [Add].
NOTE:
-Read the printer model name for "xxxx" in the printer driver name.
-If you cannot find the printer driver name, Enter [Canon] in the search column and execute a search.
7.
Check that the printer has been added in the [Printers & Scanners] pane, and close [System Preferences].
After setting up the printer, select the printer you want to use in the [Print] dialog box. To select a printer, follow the procedure below.
1.
Launch any application that can print files (e.g. TextEdit).
2.
Select [Page Setup] from the [File] menu.
3.
In the [Page Setup] dialog box, select the printer added in step 4 from the [Format for] pop-up menu and confirm that the product name that you are using is displayed between [Format for] and [Paper Size].
IMPORTANT:
If a different product name or [Generic] is displayed, the PPD file is not properly specified. Proceed on to the following steps to complete the procedure.
To re-register a printer, follow the procedure below.
1.
Open [System Preferences] and click [Printers & Scanners].
The [Printers & Scanners] pane is displayed.
2.
Select the printer you want to delete from the [Printers & Scanners] pane, and click [-].
3.
You can utilize the various features of the printer you are using, such as selecting paper types, setting the finishing method, and setting the print quality.
Setting printer features
1.
Open an application, and select [Print] from the [File] menu.
2.
Click the [Printer] pop-up menu, and select the printer you are using.
3.
Select [Printer Features] from the lower pop-up menu.
4.
Select the feature you want to set from the [Feature Set] pop-up menu, and set the displayed items.
NOTE:
Features that require particular installable options are also displayed. Check that the required option or combination of options is actually installed in the printer.
5.
When you have finished setting the features, click [Print] to begin printing.
Cautions, Limitations and Restrictions
Depending on the operating system and application you are using, when you print using a custom paper size, you may not be able to set the paper size or use the paper size you have set. If this happens, adjust the paper size slightly.
All the available features of the printer you are using are displayed in the [Printer Features] pop-up menu of the [Print] dialog box. Among these features are those that are only available when the appropriate options have been installed and/or the appropriate print settings have been specified.
In the [Printer Features] pop-up menu of the [Print] dialog box, be sure to select only those features that are applicable to the printer you are using. Be sure to not select a combination of printer features that conflict, as this will lead to printing problems.
When printing on non-standard sized paper, printing may not be able to be performed correctly if you specify a paper size that is not supported by the device.
Sometimes a combination of printer features is required for printing. If the combined settings are insufficient, this may lead to problems such as paper jamming etc. In particular, when setting the features relating to paper supply and output, it is strongly recommended that you refer to the combinations of available features in the manual for the printer you are using beforehand.
If the display of item names selected from the [Printer Features] pop-up menu are shortened to "..." and you cannot confirm the item names, you can display the name of an item by clicking on an item.
When printing, you can also select displayed print output options that are not installed in your printer. Confirm what print output options are installed in your printer and be sure to select the correct print output options when printing.
If settings regarding finishing are specified, the settings in the [Printer Features] - [Finishing] - [Finishing] pop-up menu are prioritized even when [Collate pages] is selected in the [Paper Handling] pop-up menu.
Depending on the printer model you are using, you cannot set the Inner Finisher-K1.
Page sizes displayed in the [Page Setup] dialog box vary according to the macOS version you are using.
You can use resident printer fonts only from applications such as Adobe Illustrator 10 or Adobe InDesign. (As of June 2002)
Performing two-sided printing of a document with an odd number of pages may add a blank page at the end of the print job. In this case, the extra blank page is added to the total page count for the document.
Be sure to set correct finishing and content page sizes, referring to the documentation provided with the printer. If you set an incorrect size, the print job will be cancelled. In addition, the paper type for content pages is plain paper, regardless of the paper type selected under [Paper Type].
To use the [Use Secure Watermark Function of Device]/[Use Secure Printing Function of Device] feature, install the option(s) that support the Secure Watermark function/Secure Printing Function in the printer beforehand, then activate the Secure Watermark function/Secure Printing Function from the printer driver.
If you are using an application that is capable of setting colors in a document, in order to use the [Grayscale Conversion]/[Device Link Profile] feature you must set the color mode of the document to RGB or CMYK and set the color profile of the document to a RGB-based or CMYK-based profile in the application.
Depending on the printer model you are using, paper supply from [Drawer 1 (Envelope)] is not guaranteed if you are printing on an Envelope C5, therefore it is recommended that you supply the envelope from another paper source.
If an authentication function such as department ID management or user authentication is set, you may not be able to print.
The paper output destination selected in the driver may differ from the destination that the device outputs to, depending on your environment.
Printing may be cut off at the edges of the paper, depending on the printer and paper size you are using. In this case, adjust the margins in the application.
For details on each pattern for [Saddle C-Fold], see the control panel of the device.
macOS is trademark of Apple Inc.
Copyright CANON INC. 2022