To use an SMB/CIFS network, it is necessary to perform the following procedures.

• 1 Protocol Settings (See "Protocol Settings.")

Specify the protocol settings. To specify the settings, use:

• The machine's control panel

• The Remote UI (via a web browser)

• 2 Computer Settings for Printing/Sending a Fax (See "Setting Up a Computer for Printing/Sending a Fax.")

Specify the settings of each computer you use for printing or sending a fax.

• 3 Computer Settings for a File Server (See "Setting Up a Computer as a File Server.")

Specify the settings of the computer receiving data sent from the machine.

• It is recommended that you consult the administrator for the network you are using when performing steps 1 and 3 above.

• The only base protocols supported by the machine for SMB/CIFS networks are TCP/IPv4 and TCP/IPv6. NetBEUI is not supported (SMB is used as a print application).

• If you are using the imagePASS or the ColorPASS, see the manual provided with the imagePASS or the ColorPASS.

• If you are using the imagePASS or the ColorPASS, some functions are not available with this machine. For details, see the manual provided with the imagePASS or the ColorPASS.

• Back To Top