Return to Overview

1. Check whether communication via the IP address of the computer in which you intend to install the driver is permitted in [Firewall Settings] on the Network screen. For details, see step 8 in "TCP/IPv4 Settings," or step 6 in "TCP/IPv6 Settings."

• If communication via the relevant IP address is not permitted in [Firewall Settings] on the Network screen, you cannot install the driver.

• After you have installed the driver, if communication via the IP address of the computer you have installed it on is not permitted in [Firewall Settings], you cannot print or send a fax from that computer.

2. Install the driver.

Install the driver according to the following procedures indicated in the manual for each driver:

• If you want to use the UFR II/PCL/PS printer driver
  See the procedure for dynamic installation in the Printer Driver Installation Guide.

• If you want to use the fax driver
  See the procedure for dynamic installation in the Fax Driver Installation Guide.

• The print application will be LPD and the print queue will be set to <LP> if the driver has been installed according to the above procedures.

• This machine enables you to specify print queues other than <LP>. You can also use Raw as the print application. For instructions on how to change the settings, see "Changing the Port after Installing the Driver."

• Back To Top