|
- Only LTR transparencies can be used.
- When loading transparencies, be careful not to touch the printable surface. Hold transparencies by their edges.
- Fan the stack of transparencies well before loading it in a paper source. Loading transparencies without fanning them may cause a paper jam.
- Do not load transparencies into a paper source while a print job is in progress. This may cause paper jams.
- Only use transparencies that are specially recommended for use in this machine. Other transparencies may damage the machine.
- To prevent paper jams or the folding of transparencies, it is recommended that you remove them from the output tray as soon as possible.
|
|
|
|
- Replace unused transparencies into the box in which they came. Leaving
them in the paper deck for an extended period of time may cause the transparencies to adhere to one another and result in paper jams. Avoid storing transparencies in a location subject to high-temperatures or humidity.
- If transparencies do become adhered to one another and a paper jam occurs, remove the transparencies, fan them well, make sure that fewer than 100 sheets of transparencies are loaded, or use new transparencies.
- When printing on transparencies, image density may be high, depending on the image type. In this case, adjust the output image density.
- You can load up to 250 sheets of transparencies in a paper source other than the Multi-purpose Tray.
- If a paper jam occurs, remove the transparencies and fan them well before reloading them into the paper deck.
|
|