Return to Overview

1. Place your originals.

2. Press [Options].

3. Select the desired mode from the Options screen.

• Depending on the mode, you may have to place your original on the platen glass or in the feeder. See the corresponding section on each mode for detailed information.

• If the desired setting is not displayed, press [] or [] to scroll to the desired setting.

4. Set the desired mode.

For more information on setting each mode, see the corresponding section.

To set other modes at the same time, repeat steps 3 and 4.

5. Press (Start).

If the original is placed on the platen glass, follow the instructions that appear on the touch panel display → press (Start) once for each original. When scanning is complete, press [Start Copying].

Copying starts.

• To cancel this setting, follow the procedure below.

• For modes which have a right triangle () on the bottom right of their key:
  Example: Frame Erase
  Press [Options] → [Erase Frame] → [Stop].

• For modes which do not have a right triangle () on the bottom right of their key:
  Example: Job Build
  Press [Options] → [Job Build].

• To cancel all settings and return the machine to the Standard mode, press (Reset).

• Back To Top