Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Making the Color More Vivid When Printing with Full Color
*
Making the Color More Vivid When Printing with Full Color

Return to Overview

To "Settings/Registration Table"

You can set the color to be more vivid when copying/printing stored files. You can set a default value for all jobs, rather than setting the color for each job separately.

Remark
  • This mode is enabled if you select [Full Color] in [Select Color] for the Copy or Access Stored Files function, or if the machine detects that the original is in full color when [Auto(Color/Black)] is selected.
  • If [Sepia Tone] for [Adjust One-Touch Color] is selected in Copy or Access Stored Files, you cannot use this function.

  1. Press (Settings/Registration) → [Adjustment/Maintenance] → [Adjust Image Quality] → [Full Color Printing Vividness Settings].
  1. Select [Standard], [Level 1], or [Level 2] → press [OK].

Details of each item are shown below:

[Standard]: Reproduces the colors of the original.
[Level 1]: Uses color more vivid than [Standard].
[Level 2]: Uses color more vivid than [Level 1].
  • This setting is enabled only after you restart the machine (the main power switch is turned OFF, and then back ON).
  • For information on how to turn ON and OFF the main power of the machine, see "Before You Start Using This Machine."

  • Back To Top