Registering Frequently Used Paper Size and Type for the Multi-purpose Tray
If you use a specific size and type of paper by loading in the multi-purpose tray, you can register that paper in advance as "Favorite Paper" for the multi-purpose tray. "Favorite Paper" can easily be called up from the screen which is displayed when you load the paper in the multi-purpose tray, so that you can save the time and labor to make size and type settings each time you use the specific paper.
1
Press 
.
.2
Press <Preferences> 
<Paper Settings> <Register Favorite Paper (Multi-Purpose Tray)>.
<Paper Settings> <Register Favorite Paper (Multi-Purpose Tray)>.3
Select a button to register and press <Register/Edit>.
You can change the registered name by pressing <Rename>.
4
Select the paper size.
When registering standard size paper
|
1
|
Select the standard size paper.
|
|
2
|
Press <Next>.
|
When registering custom size paper
|
1
|
Press <Custom Size>.
|
|
2
|
Specify the length of the <X> side and <Y> side.
 Press <X> or <Y> to enter the length of each side using the numeric keys.
 If you register the paper size you use frequently on buttons <S1> to <S5>, you can call them up with one touch. Registering Free Size Paper (Custom Size Paper)
|
|
3
|
Press <OK>
<Next>. |
When registering envelopes
|
1
|
Press <Envelope>.
|
|
2
|
Select the type of envelopes.
 |
|
3
|
Press <OK>
<Next>.Proceed to step 6.
|
5
Select the paper type and press <OK>.
6
Press <Close>.
|
TIPS
|
|
If <Always Specify> under <Multi-Purpose Tray Defaults> is set to <Favorite Paper>, a screen is displayed to allow you to select your "Favorite Paper" when you load the paper in the multi-purpose tray. <Multi-Purpose Tray Defaults>
|