Machine Settings
> Settings Menu
> COPY SETTINGS
COPY SETTINGS |
Setting Item | Description | Applicable Page |
1. IMAGE DIR PRIORITY | Sets whether to activate the image direction priority. | |
OFF |
Copy orientation is same as the document. | |
ON |
Copy orientation is rotated at 180 degrees. | |
2. STANDARD SETTINGS | Sets the default setting for copying. | Changing the Standard Mode |
1. IMAGE QUALITY |
Sets the document type for copying.
|
|
2. DENSITY |
Sets the density for copying.
|
|
3. ZOOM RATIO |
Sets the zoom ratio for copying. | |
PRESET RATIO |
Selects the zoom from the preset ratios. (100%, 115% B5→A4, 122% A5→B5, 129% STMT→LTR, 141% A5→A4, 200% MAX., 50% MIN., 64%, 70% A4→A5, 78% LGL→LTR, 81% B5→A5, 86% A4→B5) |
|
MANUAL |
Enters the zoom ratio by 1% increments. (50%–200%) | |
4. COPIES |
Sets the number of copies (1-99). | |
5. AUTO COLLATE |
Sets whether to collate the copies automatically.
|
|
6. TWO-SIDED |
Sets the type of two-sided copying.
|
|
7. FRAME ERASE |
Sets the type of Frame Erase copying.
|
|
8. PAPER SELECT |
Sets the paper source for copying.
|
|
3. SHARPNESS | Adjusts the sharpness of the copied image. (1-9) | Adjusting Sharpness (Copy) |
4. PAPER SIZE GROUP | Selects a paper size group for your machine.
|
|
5. MM/INCH ENTRY | Sets the unit of measurement of the frame erase width.
|
Enabling the Inch Entry |
6. INIT. COPY SET. | Restores all <COPY SETTINGS> to the default.
|
Initializing the Standard Mode |
*1 Only for users of the optional paper drawer |