Machine Settings
> Settings Menu
> COMMON SETTINGS
COMMON SETTINGS |
Setting Item | Description | Applicable Page |
1. DEFAULT SETTINGS | Selects which standby display appears when turning on the power.
|
Setting the Initial Function |
2. AUTO CLEAR SET. | Selects which standby display appears after the Auto Clearing function is activated. | Setting the Function after Auto Clear Mode Initiates |
INITIAL FUNCTION |
Sets to return standby display that is selected in <DEFAULT SETTINGS>. | |
SELECTED FUNCTION |
Sets to return standby display of the current mode. | |
3. AUDIBLE TONES | Sets whether to sound audible tones and adjusts their volume. | Setting the Audible Tones |
1. ENTRY TONE |
Beeps when pressing the keys on the operation panel.
|
|
2. ERROR TONE |
Beeps when an error (e.g., paper jam) occurs.
|
|
3. TX JOB DONE TONE |
Beeps when an error (e.g., a paper jam) occurs.
|
|
4. RX JOB DONE TONE |
Beeps when a document is received.
|
|
5. SCAN DONE TONE |
Beeps when scanning is completed.
|
|
6. PRINT DONE TONE |
Beeps when printing is completed.
|
|
4. TONER SAVER MODE | Sets whether to reduce toner consumption.
|
Setting the Toner Save Mode |
5. PRINTER DENSITY | Recalibrates the density adjustment scale if differences between the image in the document and the print occur. (1-9) | Adjusting the Print Density |
6. AUTO DRAWER SELCT | Sets whether to change to another paper source of the same size if the current paper source runs out while processing a job. Sets whether to select the appropriate paper source based on the original's size and copy ratio settings (when making a copy), or the set ratio of the image (when receiving a fax). | Setting Auto Paper Selection/Auto Drawer Switching |
1. COPY |
Sets whether to activate the Auto Drawer Select function when copying.
|
|
2. PRINTER |
Sets whether to activate the Auto Drawer Select function when printing.
|
|
3. RECEIVE |
Sets whether to activate the Auto Drawer Select function when receiving fax/I-fax documents.
|
|
4. OTHER |
Sets whether to activate the Auto Drawer Select function when printing a report or list.
|
|
7. SELECT PAPER TYPE | Sets the paper type for the paper drawer. | For the Paper Drawer |
1. DRAWER 1 |
Sets the paper type for paper drawer 1. | |
2. DRAWER 2*2 |
Sets the paper type for paper drawer 2. | |
8. REG. PAPER SIZE | Sets the paper size for the paper drawer. | For the Paper Drawer |
1. DRAWER 1 |
Sets the paper size for paper drawer 1. | |
2. DRAWER 2*2 |
Sets the paper size for paper drawer 2. | |
9. ENERGY IN SLEEP | Selects power consumption when the machine is in the Sleep mode between two levels.
|
Setting the Energy Consumption in the Sleep Mode |
10.BYPASS STD SET | Sets the standard paper size and type for the stack bypass if you always use a same kind of paper. | For the Stack Bypass |
OFF |
Deactivates the stack bypass standard settings. | |
ON |
Activates the stack bypass standard settings. | |
1. PAPER SIZE |
Sets paper size as the stack bypass standard. | |
2. SELECT PAPER TYPE |
Sets paper type as the stack bypass standard. | |
11.PAPER FEED SWITCH | Selects the paper feed method when you want to make one-sided or two-sided prints on preprinted paper (paper which has logos or patterns already printed on it). | Setting the Speed or Print Side Priority |
1. STACK BYPASS |
Selects the paper feed method for the stack bypass. | |
SPEED PRIORITY |
Print speed has priority. | |
PRINT SIDE |
The machine starts printing on the side of paper loaded facing up. Print speed becomes slower for one-sided printing. Only available for LTR, LGL and A4. |
|
2. DRAWER 1 |
Selects the paper feed method for paper drawer 1. | |
SPEED PRIORITY |
Print speed has priority. | |
PRINT SIDE |
The machine starts printing on the side of paper loaded facing down. Print speed becomes slower for one-sided printing. | |
3. DRAWER 2*2 |
Selects the paper feed method for paper drawer 2. | |
SPEED PRIORITY |
Print speed has priority. | |
PRINT SIDE |
The machine starts printing on the side of paper loaded facing down. Print speed becomes slower for one-sided printing. | |
12.DISPLAY LANGUAGE | Selects the language on the display. | Changing the Language Shown on the Display |
13.ADF DIRTY ERROR*3 | Sets whether the error message will appear when the ADF is dirty.
|
|
14.INIT. COMMON SET. | Restores all <COMMON SETTINGS> to the default except for <DISPLAY LANGUAGE>.
|
Returning the Common Settings to Their Defaults |
*1 Settings of the tone levels are not availeble on imageRUNNER 1025/1025N. |