MARGIN |
This setting enables you to set the page margin in inches or millimeters. The settings can be set in increments of 0.01 inches (0.5 mm) from -1.90 inches (-50.0 mm) through +1.90 inches (+50.0 mm). The default setting is <0.00INCHES>. |
Remark |
|
|
|||||
|
|
|
|
The available setting is from -1.90 to +1.90INCHES (-50.0 to +50.0MM). Use [] or [] to adjust the margin. You can specify the edge along which the margin will be created in the <BINDING> setting (previous setting). To create a margin along one of the edges of the paper, use this setting in combination with the <BINDING> setting.
|
|
|